Suzuki Burgman AN400, Service Manual

Page: 188 / 475

1D-44 Engine Mechanical:
Engine Bottom Side Assembly
B705H11406058
Assemble the engine bottom side in the reverse of
disassembly. Pay attention to the following points:
Crankshaft
• Using the special tools, press in the crankshaft into
the left crankcase.
NOTE
When pressing in the crankshaft into the
crankcase, insert the inner driver
attachments “A” (
φ
25 mm) and “B” (
φ
30 mm)
of the bearing installer set between the
crankcase bearing inner lace and crankshaft
installer.
Special tool
(A): 09910–32812 (Crankshaft installer)
(B): 09910–32870 (Crankshaft installer
attachment)
(C): 09913–70210 (Bearing installer set)
CAUTION
!
• Do not hit the crankshaft with a plastic
hammer or the like to install the crankshaft
into the crankcase.
• Make sure that the direction of conrod is
turned toward the cylinder hole.
Oil Pump
• Install the oil pump drive shaft (1) and oil pump drive
chain (2) to the bearing.
• Install the oil pump assembly (3) and tighten the oil
pump mounting bolt to the specified torque.
Tightening torque
Oil pump mounting bolt: 10 N·m (1.0 kgf-m, 7.0
lb-ft)
• Install the oil pump drive chain cover (4).
(A)
(B)
(C)
“B”
(C)
“A”
I705H1140226-01
(A)
(B)
(C)
“B”
(C)
“A”
I705H1140111-03
1
2
I705H1140113-02
3
I705H1140114-01
4
I705H1140115-04