Rev. 2.4
- 41 -
© 2014 Suzo-Happ Group
Bill-to-
Bill™ 300XE
Next, inspect the inside of the cashbox for any damaged surfaces. Ensure the plate stacking the bills
moves freely and that the pins used by the plate for sliding are not bent or damaged. The stacking
plate supported by the springs must be straight. If any damage is found, please contact a technician
for further analysis.
Using a can of compressed air, clear out any dust that might have accumulated at the back of the
cashbox along the tracks of the bill stacking mechanism to ensure the cashbox reaches its maximum
bill capacity.
Additionally, turning the cashbox around reveals the stacker drive mechanism and two optical
sensors. The sensors should be cleaned using a cotton-swab and the three gears should be turned
by hand to ensure they are no seized.
Visually inspect the cashbox cam used to lock the cashbox and ensure it is no broken and does not
show any attempts of vandalism. Damaged cams will compromise the security of the cashbox and
must be checked often. Replace cashbox immediately if damage is detected.