Rev. 2.4
- 38 -
© 2014 Suzo-Happ Group
Bill-to-
Bill™ 300XE
can now be cleaned more thoroughly.
More importantly, the belts are cleaned using the LCD cleaner and an anti-static microfiber cloth. The
belts can be manually rotated and cleaned all round.
Ensure no oily residue is left on the belt after it comes in contact with the operator as this will
cause the bill to slip as it is being dispensed (use of gloves is highly recommended)
The drum has two light guides embedded in its body, one on each side. Turn the drum around to find
each of the light guides and clean it using a cotton swab. Using a can of compressed air, spray the
drum and remove any dust and debris that has accumulated inside the grooves of the drum.
The three arms keeping the belts in tension are located above the drum. They can be
depressed to allow the drum to move more freely when servicing it.
If the dispenser has a metal bezel, ensure the grounding pin is properly interfaced with the connector
on the chassis as it is installed back into place and that it is firmly connected to the dispenser.