Rev. 2.4
- 21 -
© 2014 Suzo-Happ Group
Bill-to-
Bill™ 300XE
In order to ensure it is properly installed, first, insert the switch back into the housing while holding the
bearings with the snap pieces pointing upwards (match the gears on the switch to the side with the
gears on the chassis).
The groove on the bearings should be placed onto the body of the chassis.
Ensure the switch itself is inserted into the chassis by the bearings to allow the free rotation of the
switch. This will allow the switch to self-adjust in order to mesh with the gears properly and ensure no
gap remains between the bearing and the groove in the chassis.