![background image](http://html1.mh-extra.com/html/suzohapp/bill-to-bill-300xe/bill-to-bill-300xe_serviceability-manual_1408250026.webp)
Rev. 2.4
- 26 -
© 2014 Suzo-Happ Group
Bill-to-
Bill™ 300XE
5.
Level 2 maintenance
Although a basic level of cleaning has been performed in the Level 1 maintenance, over time,
additional effort is required to get tougher dirt off the bill path. As more moderate dust and oils will
start accumulating deeper along the bill path and in tighter and harder to reach areas, Level 2
maintenance should be performed. For recommended period of service please refer to the
Maintenance Chart in section 7. Additionally, this level should be performed in parallel with Level 1
maintenance for all modules unless otherwise specified.
Additionally, for each of the modules maintenance is performed, visually inspect the part for any dents
or scratches on the surface of the module. Ensure there are no broken and/or damaged parts and no
broken wires due to the mishandling of the unit or possible vandalism attempts. More specific items
that should be watched out for are included under each module and if any such damage in its
extreme form is noticed, please contact a Suzo-Happ Group certified technician.
This level requires only basic level of manual disassembly and can be performed without
the need for any special tools.
Level
Location
Responsibility
Service time (per unit)
B
On-Site
Field Technician
30min
– 1h
The tools required for this level are:
1) Can of compressed air
2) Alcohol-free LCD cleaner
3) Anti-static microfiber cloth
4) A set of cotton swabs
5) Dummy card
6) Tweezers
7) Philips screwdriver (PH1 x 60)
8) Flathead screwdriver (3,0 x 60)
9) Cleaning card for
bank note acceptor
10) A pair of glove
Ensure the recycling cassette has been properly and safely unloaded before performing
the following maintenance steps
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)