Susteco BIGHANNA T120, Operation Manual, Page: 7 / 139

9 ANNUAL SERVICE – MAINTENANCE ENGINEER
9.2.1 CHECK FUNCTION OF EMERGENCY STOP AND SAFETY SWITCHES ON ALL DOORS.
9.2.2 CHECK ALL WARNING LABELS
9.2.3 CLEAN VENTILATION PIPES TO FAN.
9.2.4 CHANGE VENTILATION FILTER IF WORN.
9.2.5 TEST FUNCTION OF HEATER AND INSPECT FOR WEAR.
9.2.6 INSPECT THE WHEELS FOR WEAR.
9.2.7 CHECK, CLEAN AND GREASE CHAIN AND SPROCKETS.
9.2.8 CHECK THAT MACHINE IS LEVELLED.
9.2.9 INSPECT BOTH FRONT AND BACK END OF THE CYLINDER, ADJUST ENDS IF NECESSARY.
9.2.10 CHANGE SEALS ON INSPECTION DOORS AND INLET HOPPER IF WORN.
9.2.11 GREASE BEARINGS ON SHREDDER.
9.2.12 CHECK KNIFE AND ROTARY KNIFE FOR WEAR, ADJUST OR EXCHANGE IF NECESSARY.
9.2.13 CHECK DRIVE WHEELS AND DRIVE BELT FOR WEAR. CHECK TENSION OF DRIVE BELT.
10 TROUBLE SHOOTING – MACHINERY
10.4.1 ALARM LOG
10.4.2 LOG FILE ALARMS
10.5.1 MAGNETIC CONTACT(110120) FOR INSPECTION DOOR POSITION
10.18.1 MODELS T60, T75 AND T120 – NEW AXLE
10.18.2 MODELS T60, T75 AND T120 – OLD AXLE
10.18.3 MODEL T240