Susteco BIGHANNA T120, Operation Manual, Page: 35 / 139

NAVIGATING BETWEEN DIFFERENT SCREENS
Press the different symbols to navigate between the different screens.
Press the numeric key pad, enter pin code and access ‘basic’ level (see below).

Note that the pin code must be entered before the Hanna bin lift can
be operated using the two hand device.

When Big Hanna is delivered with a RFID reader (optional) the
swipe of a RFID-card will replace entering the PIN code or
logging in to the touch screen depending on the program for
the specific machine. The custom made logic for a machine
can be found in the machine specification.
Press the ‘Big Hanna Home,’ enter password and access ‘Operator,’ ‘Tools’ and ‘Big
Hanna.’
At the bottom of most screens, there are navigation arrows taking you to the next
screen (arrow in right hand corner) or to the previous screen (arrow in left hand
corner). Note that the arrows only navigate between the different screens within that level. The red ‘X’
will always take you back to the start screen.
The different menus are divided into user levels and are coloured differently:
Orange: Help section
Green: ‘Operator’ (Choice of number of rotations, wait time, downloading data etc.)
Blue: ‘Tools’ (Choice for language, setting of machine number and weighing option.)
Grey: ‘Big Hanna’ (Factory settings – only used by the manufacturer / distributor.)
[Yellow: ‘Alarm’ (This is not a ‘level’ as such but all alarm screens have a yellow layout.)]