Susteco BIGHANNA T120, Operation Manual, Page: 115 / 139

9 ANNUAL SERVICE – MAINTENANCE ENGINEER
MECHANICAL TROUBLE SHOOTING AND ELECTRICAL WORKS MUST BE DONE BY QUALIFIED
PERSON(S) IN ACCORDANCE WITH ALL APPLICABLE CODES AND STANDARDS. THE OWNER
OF THE MACHINE MUST MAKE THE RISK ASSESSMENT FOR EACH TASK BELOW
DETERMINING WHAT QUALIFICATIONS ARE NECESSARY.
WARNING! THE CYLINDER ROTATES ON A TIMER FUNCTION. WHEN REMOVING THE BOLTED
COVERS OR THE HOOD THE POWER SUPPLY MUST BE SWITCHED OFF AT THE MASTER
SWITCH AND LOCKED.
THE POWER SUPPLY MUST BE SWITCHED OFF AT THE MASTER SWITCH AND LOCKED
BEFORE REPAIRING OR SERVICING THE MACHINE.
LOCKOUT / TAGOUT BEFORE REMOVING BOLTED COVERS.
ANNUAL SERVICE CHECK LIST

Check function of emergency stop and safety switches on all doors.
 Check all warning labels
 Clean ventilation pipes to fan.
 Change ventilation filter if worn.
 Test function of heater and inspect for wear.
 Check, clean and grease chain and sprockets.

Inspect the wheels for wear.
 Check that machine is levelled.
 Inspect both front and back end of the cylinder, adjust ends if necessary.
 Change seals on inspection doors and inlet hopper if worn.

Check motors in accordance to separate manual for each motor.

For shredder option:
 Grease bearings on shredder.
 Check knife and rotary knife for wear.

Check drive wheels and drive belt for wear. Check tension of drive belt.