9.2.6
CLEAN VENTILATION PIPES TO FAN.
Clean all piping leading from front end to the fan.
9.2.7
CHANGE VENTILATION FILTER IF WORN.
Change ventilation filter if worn. Article no 110091.
9.2.8
TEST FUNCTION OF HEATER AND INSPECT FOR WEAR.
Heater is positioned in the front end under the hood. Replace if worn.
9.2.9
INSPECT THE WHEELS FOR WEAR.
LOCKOUT AND TAGOUT BEFORE REMOVING BOLTED COVERS.
Check wheels for wear and replace if necessary. The wheels can be accessed from the inspection doors
on and by removing one of the bolted covers on the left side.
Two persons should always lift and position the bolted covers on the side of the machine.
Note! The bolted cover in the middle does not need to be removed in order to inspect the wheels.