1.15
INSTALLATION AND TRANSPORTATION
1.15.1
CLIMATE – PROTECTING THE MACHINE FROM THE ELEMENTS
The machine can be installed indoors or outdoors but must be well protected from elements like rain,
sunshine, sand etc.
Temperature requirements when installed with a heater (optional): -20ºC up to 50ºC.
Note that strong winds in combination with temperatures below zero increases the cooling effect and
can make it hard for the heater to keep the temperature inbetween the hood and the cylinder above
10ºC. If the climate conditions with wind and cold are common we recommend installing the machine
with walls protecting also from the wind. At installation sites where temperatures are below - 20 C
degrees for more than 2-3 weeks in a row we recommend installing the composter in an indoor area
keeping installation area at least about 0 degrees.
Temperature requirements when installed without a heater (optional): 10ºC up to 50ºC.
In areas where the temperature does not drop below 10ºC there is no need for a heater since the
biological heat is generated naturally.
1.15.2
INSTALLATION
See separate installation manual.
1.15.3
TRANSPORTATION OF THE COMPOSTER
See separate installation manual.
1.16
NAMEPLATE ON MACHINE
The nameplate is positioned on the front of the machine. The nameplate declares the number for one
unique Big Hanna and is therefore very important in regards to traceability for spare parts.