3.7
FEEDING IN FOOD WASTE AND PELLETS
The optimum way of feeding the machine is smaller quantities many times per day as this does
not cool off the biological process as much as feeding everything in one batch.
Load the food waste into the inlet / infeed hopper and close the lid. Push the infeed button to feed in
the food waste to the cylinder, see below.
Button
Function (weight/volume
registration not active)
Function (weight/volume
registration active)
Starts infeed conveyor and cylinder
rotation in order to feed in food
waste from the hopper into the
cylinder.
Opens a screen for registering
weight/volume of food waste and
wood pellets (or similar). After
registration, there is a choice to
either start the infeed cycle or just
registering the weight/volume and
go back to the start screen. When
scales are installed (optional)
weight registration is always active).
3.7.1
BIN LIFT
A bin lift can be fitted for all machines with a hopper fed inlet for operation of this read the instruction
manual for the bin lift. When the operation buttons UP and DOWN for the bin lift is positioned on Big
Hanna’s electrical cabinet first login with the PIN code before trying to operate the bin lift.
When the operation buttons of the bin lift are situated on the Big Hanna’s electrical cabinet – log
in using the key pad on the screen!
3.7.2
INFEED TIME
Pressing the infeed button on the start screen starts the cylinder rotation and in-conveyor in the
infeed hopper. The time frame which the in-conveyor operates is set in the menu ‘infeed time’ under
‘operator’ settings.
THE RECOMMENDED
INFEED TIME IS 2 MIN.
Choose between 1, 2, 3,
4 and 5 minutes.
Press the numeric key pad, enter the
pin code and access ‘basic’ level.