3.3
NAVIGATING BETWEEN DIFFERENT SCREENS
Press the different symbols to navigate between the different screens.
Press the numeric key pad, enter pin code and access ‘basic’ level (see below).
Press the ‘Big Hanna Home,’ enter password and access ‘Operator,’ ‘Tools’ and ‘Big
Hanna.’
When Big Hanna is delivered with a RFID reader (optional) the
swipe of a RFID-card will replace entering the PIN code or
logging in to the touch screen depending on the program for
the specific machine. The custom made logic for a machine
can be found in the machine specification.
At the bottom of most screens, there are navigation arrows taking you to the next screen (arrow in
right hand corner) or to the previous screen (arrow in left hand corner). Note that the arrows only
navigate between the different screens within that level. The red ‘X’ will always take you back to the
start screen.
The different menus are divided into user levels and are coloured differently:
Orange:
Help section
Green:
‘Operator’ (Choice of number of rotations, wait time, downloading data etc.)
Blue:
‘Tools’ (Choice for language, setting of machine number and weighing option.)
Grey:
‘Big Hanna’ (Factory settings – only used by the manufacturer / distributor.)
[Yellow:
‘Alarm’ (This is not a ‘level’ as such but all alarm screens have a yellow layout.)]