10.11
FUSE FOR HEATER TRIPPED
Follow the instructions on the screen: Reset fuse in electrical cabinet.
Dismantle the front panel and inspect the heater. If there is any damage on
the heater or the fuse trips repeatedly contact service personnel or order a
replacement heater.
Note that this ALARM needs to be acknowledged in the ALARM list in order to turn off the Alarm
Indicator which is visible in the left hand upper corner on all screens.
Use the ALARM button to go to alarm log menu.
10.12
CHANGING WHEELS
WARNING – MOTOR FOR CYLINDER IS EQUIPPED WITH A BRAKE SECURING THE CYLINDER
POSITION. THE CYLINDER WILL MOVE IF THE BRAKE IS DISCONNECTED.THE CYLINDER FILLED
WITH MATERIAL HAS A CONSIDERABLE WEIGHT AND CAN CAUSE FATAL ACCIDENTS WHEN IT
MOVES!
Balance the material inside the cylinder before replacing a wheel and make sure that the cylinder
is supported and will not tilt when the wheel is removed.
The condition of the wheels needs to be checked every year for wear and replaced if necessary.
Place support under the cylinder
allowing the wheel to be removed
without the cylinder tilting.
Loosen the nyloc nut from the axle.
Push the axle/bolt from its position and
remove the wheel.
Replace the wheel and axle/bolt.