CYLINDER NEEDS TO BE EMPTIED BEFORE DOING ANY WORK INSIDE THE CYLINDER! IF
CYLINDER IS TO BE ENTERED INTO WITHOUT BEING COMPLETELY EMPTY, CARBON DIOXIDE
LEVEL INSIDE MUST FIRST BE MEASURED WITH A CALIBRATED INSTRUMENT READING SAFE
CARBON DIOXIDE LEVEL (BELOW 0.5%)! SAFETY MEASURES OF ENCLOSED AREA MUST
STRICTLY BE APPLIED BEFORE ENTERING THE CYLINDER.
WARNING: SPILL OF FOOD WASTE MAY CAUSE SLIPS AND TRIPPING HAZARDS AND/OR
ATTRACT VERMIN. KEEP ALL SURFACES AND PREMISES CLEAN.
WARNING! NEVER FILL THE CYLINDER WITH COMPOSTING MATERIAL ABOVE THE
RECOMMENDED FILLING LEVEL OF 60-70% SINCE THIS CAN CAUSE SERIOUS DAMAGE TO THE
COMPOSTER!
WARNING! LEAKAGE FROM THE FRONT GABLE MAY ACCUMULATE ON HEATER AND THIS
CAN CAUSE A FIRE HAZARD UNDER THE HOOD. FOLLOW THE HEATER MAINTENANCE
SCHEDULE AND METHODOLOGY TO AVOID FIRE HAZARD.
WARNING! THE COMPOSTER IS DESIGNED FOR FOOD WASTE AND SAWDUST OR PELLETISED
SAWDUST ONLY. NEVER PUT METAL, OTHER INORGANIC OR ORGANIC MATERIAL OTHER THAN
WHAT IS SPECIFIED IN THIS MANUAL IN TO THE COMPOSTER.
HAZARDOUS OR CONTAMINATED WASTE MAY UNDER NO CIRCUMSTANCES BE PUT INTO
CYLINDER.
DO NOT STERILIZE THE FOOD WASTE BEFORE FEEDING IT INTO THE COMPOSTER AS THIS
WILL SERIOUSLY INHIBIT THE BIOLOGICAL PROCESS.
THE COMPOSTER CAN ONLY BE MOVED WHEN IT IS EMPTY! NEVER ATTEMPT TO MOVE BIG
HANNA COMPOSTER WHEN CYLINDER CONTAINS COMPOSTING MATERIAL.
WARNING! WHEN LIFTING: THE COMPOSTER IS HEAVIER AT THE FRONT! PROPER AND
ADAPTED LIFTING MEASURES MUST BE TAKEN TO AVOID BODILY INJURIES OR BIG HANNA
COMPOSTER DAMAGE.
ATTENTION! LOCAL OR SITE SPECIFIC REGULATIONS MAY APPLY TO ON SITE COMPOSTING.
ATTENTION! THE COMPOST MUST BE STORED AND USED ACCORDING TO LOCAL
REGULATIONS. PLEASE CONTACT THE AUTHORITY RESPONSIBLE FOR ENVIRONMENT IN CASE
OF UNCERTAINTY.
LOCKOUT / TAGOUT BEFORE REMOVING BOLTED COVERS.
CAPACITOR CIRCUIT ON ALL MOTORS. LOCKOUT / TAGOUT AND WAIT 10 MIN BEFORE
HANDLING.
SECURE THE AREA AROUND TRANSMISSION FROM UNAUTHORIZED PERSONNEL WHILE
TEST RUNNING WITH THE SECURITY MEASURES REMOVED.