2.0 Introduction
- 13 -
2.3.3 Printers
Serial printer
For UL and ULC Listed applications, the following UL/ULC Listed printer can be used with the SG-System 5:
l
Seiko DPU-414
TCP/IP printer
For UL Listed applications, the UL Listed SG-System 5 Console software can be used with the SG-System 5.
NOTE: For ULC Listed applications, the Console Printer application is considered supplemental and is only allowed to be used in con-
junction with a compatible ULC Listed printer.
SG-System 5 Console software system requirements
Compatible operating systems:
l
Microsoft Windows 2008 Server (32 and 64 bit)
l
Microsoft Windows 7 (32 and 64 bit)
l
Microsoft Windows 8 (32 and 64 bit)
l
Microsoft Windows 8.1 (32 and 64 bit)
l
Microsoft Windows 10 (32 and 64 bit)
NOTE: Requires .NET Framework 3.51.
Hardware requirements:
l
Intel Atom CPM @ 1.6GHz and 1 GB of RAM
NOTE: Do NOT use printer cables that have only one common ground wire.
2.3.4 UL Manual mode
For UL Manual mode, each event activates the internal buzzer to be acknowledged manually. Each event is sent automatically to the connected printer.
NOTE: A user must be logged in before acknowledging signals. A logged in user remains logged in until a new user enters a valid user
name and password or if the SG-CPM5 resets or reboots.
2.3.5 SG-System 5 power limited circuit separation
FIGURE 2-4: SG-System 5 power limited circuit separation from non-power limited circuit diagram
1.
Secondary line card phone connections
6.
Primary line card Ethernet connections
2.
Secondary SG-CPM5 Ethernet connection
7.
Primary SG-CPM5 Ethernet connection
3.
Secondary SG-CPM5 automation and printer port
8.
Primary SG-CPM5 automation and printer port
4.
Secondary SG-PSU5 AC power connection (see note)
9.
Primary SG-PSU5 AC power connection (see note)
5.
Secondary SG-CPM5 display connection
10.
Primary SG-CPM5 display connection
NOTE: Employ only 26 AWG wires for the Telco connections.
