7.0 SG-DRL5/DRL5E/DRL5-2L PSTN Line Cards
- 116 -
Program Option 17C/27C as '00' to disable this function.
Example:
4/2 format with account code 1234, alarm code 2 on zone 3. (1234-23)
Option
17A
27A
Option
17C
27C
Switch
Reason (or 17B/27B) to audio
00
1-2
Yes
Alarm code 2 falls within the code range 1-2.
1-1
00
Yes
Account code 1234 falls within the range 1-1.
2-3
00
No
Account code 1234 is outside the range 2-3.
00
3-4
No
Alarm code 2 is outside the range 3-4.
1-2
3-4
No
If both are programmed, both must be good and alarm code 2 is outside the
range 3-4.
3-5
1-3
No
Both must be good and account code 1234 is outside the range 3-5.
1-4
1-5
Yes
Alarm code 2 falls within the code range 1-5, account code 1234 falls within
the range 1-4.
NOTE: The first digit of the Contact ID event code also follows Option 17C/27C.
For UL Listed products, the permitted setting is 00.
SG-DRL5 Option 17D/27D: Audio Zone Code
Default (00)
Audio zone code is the range of zone codes that activates audio. The first digit is the lowest code. The second digit indicates the highest zone that activ-
ates audio. Option 17D/27D may be used with 10 to 40 Baud formats, DTMF 4/1, 4/2, and 4/3 formats.
NOTE: Option 17D/27D Only works for DMP Serial 1 not for DMP Serial 3.
For UL Listed products, the permitted setting is 00.
SG-DRL5 Option 17E/27E Audio RS-232
Default (00)
This is the code sent to the automation software that indicates that 2-way audio has been initiated. If this option is set to '00' there is no audio-initiated
message sent to the automation output.
Setting
Description
Automation output
00
2-way audio message disabled
No Automation output
01
Outputs automation message with protocol "S"
Send SRRLLL[#AAAA|NLFssoo][DC4]
02
Outputs automation message with protocol "O"
Send 0RRLLL[#AAAA|NLFssoo][DC4]
05
Outputs automation message with protocol "S" and adds RRLL to
the message as clear text
Send SRRLLL[#AAAA|NLFssoo*RRLL*][DC4]
06
Outputs automation message with protocol "O" and adds RRLL to
the message as clear text
Send 0RRLLL[#AAAA|NLFssoo*RRLL*][DC4]
09
Outputs automation message with protocol "S" and adds the dialed
phone number for the call transfer
SRRLLL[#AAAA|NLFs-
soo*#NNNNNNNNNNNNNNNN*][DC4]
0A
Outputs automation message with protocol "O" and adds the dialed
phone number for the call transfer
0RRLLL[#AAAA|NLFs-
soo*#NNNNNNNNNNNNNNNN*][DC4]
0D
Outputs automation message with protocol "S" and adds RRLL and
the dialed phone number for the call transfer
SRRLLL[#AAAA|NLFs-
soo*RRLL#NNNNNNNNNNNNNNNN*][DC4]
0E
Outputs automation message with protocol "O" and adds RRLL and
the dialed phone number for the call transfer
0RRLLL[#AAAA|NLFs-
soo*RRLL#NNNNNNNNNNNNNNNN*][DC4]
8X
(X=any of the
values above)
Any outputted automation message has oo (line card slot number)
changed to cc (line card channel number)
NLFssoo becomes NLFs00c in all messages
Where:
ss - is receiver shelf number
oo - is receiver slot number (which line card)
