3. Setup the BioStar System
25
Copyright © 2008, Suprema Inc. On the web: www.supremainc.com
4. Select the device or devices to add by clicking the checkboxes next to the
device IDs.
5. Click
Add
to add the device
6. Close the confirmation message that appears and click
Finish
to exit the
wizard.
7. In the navigation pane, click the slave device.
8. In the device pane, click the Network tab.
9. Change the RS485 serial setting by selecting
Slave
from the Mode drop-down
list.
10.Click
Apply
to save the change.
3.2.3 Configure a BioStation Device
This section provides an overview of configuring BioStation devices to work with
the BioStar software. For more information, refer to the installation guides that
accompany your devices. To configure a BioStation device,
1. Click
Device
in the shortcut pane.
2. Double-click a BioStation device name in the navigation pane. This will open
a Device pane similar to the one below:
3. Configure device information on the following tabs. For an explanation of
device settings, see section 5.1.1.
•
Operation mode
- Use this tab to set the device time or retrieve it from
a host PC and adjust settings for operation modes.
