suprema BioStar Administrator'S Manual Download Page 105

Page: 105 / 120

5. Customize Settings

5.3.2 Customize Settings for Entrance Limit Zones

The sections below describe the settings available for entrance limit zones.
Customize the way the zone functions by changing these settings to suit your
particular environment and operational needs.

5.3.2.1 Details tab

The Details tab allows you to specify entrance limits and a schedule for
the zone restrictions.

•

Entrance Limit Zone Setting

- click the checkbox to enable an

entrance limit setting, and then specify the effective hours for the
entrance limit.

•

Max Number of Entrance

- set the maximum number of entries

allowed during the specified time limit.

•

Timed APB (min)

- specify a time limit for re-entry into a zone.

Summary of Contents for BioStar

























































































































Search results

Summary of Contents for BioStar

Reviews:

Related manuals for BioStar

Brands by name

Popular brands

suprema BioStar, Administrator'S Manual

Search results

Summary of Contents for BioStar

Reviews:

Related manuals for BioStar

Brands by name

Popular brands