3. Setup the BioStar System
39
Copyright © 2008, Suprema Inc. On the web: www.supremainc.com
3.4.2.4 Configure alarm actions and outputs
Configure alarm actions to specify what alerts to receive, if any, and
which ports and relays to use for alarm outputs. The Alarm tab (in the
Zone pane) offers the following options for all zones except access zones.
For more information about alarms, see sections 3.4.2.5 and 3.8.
•
Program Sound
- set a sound to be emitted by the software (at the
client computer). To add custom sounds, see section 3.8.1.2.
•
Device Sound
- set a sound to be emitted by a particular device.
•
Send Email
- create an email alert to send when an alarm is
activated and select recipients or email alerts. For more information
about email alerts, see section 3.8.2.
•
Output Device
- specify a device that will send an alarm signal to an
external device, such as an alarm siren.
•
Output Port
- specify the port to use for an output signal.
•
Output Signal
- specify a type of output signal.
3.4.2.5 Configure arm and disarm settings
After adding an alarm zone, you can configure the actions that will arm
and disarm the zone. To configure arm and disarm settings,
1. Click
Doors
in the shortcut pane.
2. In the navigation pane, click the name of an alarm zone. If necessary,
expand the Zone tree first.
3. Click the Details tab in the Zone pane.
4. Click
Setup
. This will open the Arm/Disarm Setting window.
5. To configure cards for arming or disarming zones:
a. Select a device from the Read Device drop-down list.
