Supra eKey, Handbook, Page: 158 / 183

Chapter 9 Page 153
6. Select Desktop overwrites handheld.
Note: Changing the HotSync setting from the default affects only
the next HotSync operation. Thereafter, the HotSync
Actions revert to their default settings. To use a new setting
on an ongoing basis, select the Set As Default box.
Thereafter, whatever you selected as the default setting is
used when you click the Default button in the Custom
dialog.
7. Click OK.
8. Repeat steps 4 through 7 to change conduit settings for other
applications.
9. Click Done to activate your settings.
10. Perform a HotSync operation.
Beaming applications
If you accidentally delete an application or have to perform a hard
reset, you can beam the eSYNC, eKEY, and eDATA applications
between eKEYs. Your eKEY is equipped with an IR (infrared) port that
you can use to beam information to another eKEY that's close by. The
IR port is located at the top of the handheld, behind the small dark
shield.
Tip: For best results, eKEYs should be between 10 centimeters
(approximately 4 inches) and 1 meter (approximately 39 inches) apart,
and the path between the two eKEYs must be clear of obstacles.