Your winch is a very powerful
machine. If used unsafely or
improperly, there is a possibility
that property damage or personal
injury could result.
The responsibility
for safe installa-
tion and operation of the winch and
prevention of personal injury and
property damage ultimately rests
with you, the operator. There is no
substitute for the use of good
judgement and caution in operating
a winch.
The wire rope
may break before
the winch stalls. For heavy loads, use
a pulley block to reduce the load on
the wire rope.
2. AFTER READING AND UNDER-
STANDING THIS MANUAL, LEARN
TO USE YOUR WINCH.
After installing the winch,
practice using it so you
will be familiar with it
when the need arises.
3. DO NOT“move” your vehicle to
assist the winch in pulling the
load. The combination of the
winch and vehicle pulling togeth-
er could overload the wire rope
and the winch.
WARNING
!
WARNING
!
GENERAL SAFETY
INFORMATION
Figure 2
Double Line
Single Line
1. Maximum working load capacity
is on the wire rope layer closest
to the drum
NOT OVER-
LOAD. DO NOT ATTEMPT PRO-
LONGED PULLS AT HEAVY
LOADS .Overloads can damage
the winch and/or the wire rope
and create unsafe operating con-
ditions. FOR LOADS OVER 1,000
POUNDS (454 kg), WE RECOM-
MEND THE USE OF THE OPTION-
AL PULLEY BLOCK TO DOUBLE
LINE THE WIRE ROPE (Figure2).
This reduces the load on the
winch and the strain on the wire
rope by approximately 50%.
Attach hook to load bearing part.
The vehicle engine should be
running during winch opera-
tion.
If considerable winching is
performed with the engine off,
the battery may be too weak to
restart the engine.
4. ALWAYS STAND CLEAR OF WIRE
ROPE,
HOOK AND WINCH. IN THE
UNLIKELY EVENT OF ANY COM-
PONENT FAILURE IT‘S BEST TO BE
OUT OF HARM‘S WAY.
5. INSPECT WIRE ROPE AND EQUIP-
MENT FREQUENTLY.
A FRAYED
WIRE ROPE WITH BROKEN
STRANDS SHOULD BE
REPLACED IMMEDIATELY.
Always replace wire rope with
the manufacturer‘s identical
replacement part (see
Replacement Parts List).
Periodically check the winch
installation to ensure that all
bolts are tight.
6. USE HEAVY LEATHER GLOVES
when handling wire rope. DO
NOT LET WIRE ROPE SLIDE
THROUGH YOUR HANDS.
7. NEVER WINCH WITH LESS THAN 5
TURNS of wire rope AROUND THE
WINCH DRU
ince the wire rope
end fastener may NO
ithstand
full load.
T w
DO
.
Un guinche electrico es similar a cualquier otra herramienta electrica, tal
como un taladro o una sierra. No debe permitirse que el motor se sobrecali-
ente. Tomanado precauciones normales se prolongara la vida util del motor.
Mantenaga la duracion de la traccion con el guinche lo mas corta posible
Si el motor del guinche se atasca, no continue energizando
el motor.
Si el motor se calienta hasta el punto en que esta demasiado cali-
ente al tacto
, interrumpa el trabajo y deje que el moto se enfrie.
Para obtener mas informacion y datos de la garantia, conectese a
www.superwinch.com
CAUTION
!
SERVICIO INTERMITENTE
2
23
.
LT3000 ATV LISTA DE REPUESTOS
Referencia número
Descripcion
Numero de parte
1
Cable
1511F
2
Motor
87-12890
3
Tambor y barras de unión 87-12891
4
Reductor de engranajes 87-12892
5
Solenoide
87-12893
6
Interruptor de manubrio 87-12894
7
Control remoto
87-12895
8
Interruptor
87-22873-16
9 Gancho Con Reten 87-42615
10
Guiacabos de rodillos
87-12911
1
7
5
10
6
8
2
3
4
9
Note; all Safety references in this
manual that refer to the use of,
WIRE ROPE, also apply to the use of,
SYNTHETIC ROPE.
M s
