Chapter 5: Running Setup
5-21
5-2
Security Setup
5-2-1 Supervisor
User
The system can be configured so that all users must enter a password
every time the system boots or when the WINBIOS setup is executed.
You can set either a Supervisor password or a User password. If you
do not want to use a password, just press <Enter> when the password
prompt appears.
The password check option is enabled in the Advanced Setup by
choosing either
Always
or
Setup
. The password is stored in CMOS RAM.
You can enter a password by typing the password on the keyboard,
selecting each letter via the mouse, or selecting each letter via the pen
stylus. Pen access must be customized for each specific hardware
platform.
When you select Supervisor or User, AMIBIOS prompts for a password.
You must set the Supervisor password before you can set the User
password. Enter a 1-6 character password. The password does not
appear on the screen when typed. Retype the new password as
prompted and press <Enter>. Make sure you write it down. If you forget
it, you must drain CMOS RAM and reconfigure.
5-3
Utility Setup
5-3-1 Anti-Virus
When this icon is selected, AMIBIOS issues a warning when any program
(or virus) issues a disk format command or attempts to write to the boot
sector of the hard disk drive. The settings are
Enabled
or
Disabled
.
5-3-2 Language
Note: The Optimal and Fail-Safe default settings for this option
are English.
Summary of Contents for SUPER P6DBE
Page 12: ...Chapter 1 Introduction 1 3 Notes...
Page 38: ...Chapter 1 Introduction 1 29...
