2-4
SUPER P6DBS/P6DBE/P6DBU/P6SBU/P6SBS/P6SBA/P6SBM
Manual
Figure 2-3. Attaching the Fan Power Cable
B
C
A
OEM Pentium II and Heat Sink Support
The heat sink support consists of a top bar, a base bar, four posts on the
top bar and two posts on the base bar. The two posts on the base snap
into the motherboard. Install the two pins into the base bar. Insert the
Pentium II with the heat sink on it into Slot 1. Install the top support bar. The
four top posts should be close to Slot 1. The bottom most row of fins in the
heat sink should fit between the top support bar and the bottom support bar
as shown in Figure 2-4.
Removing the Pentium II Processor
To remove the Pentium II processor from the motherboard, follow the re-
verse of the installation process. Note: Do not reuse the pegs.
Figure 2-4. Heat Sink Support
Summary of Contents for SUPER P6DBE
Page 12: ...Chapter 1 Introduction 1 3 Notes...
Page 38: ...Chapter 1 Introduction 1 29...
