Chapter 5: Running Setup
5-1
Chapter 5
Running Setup*
*Optimal and Fail-Safe default settings are bolded in text unless otherwise
noted.
The WinBIOS Setup options described in this section are selected by
choosing the appropriate high-level icon from the Standard Setup screen.
All displayed icons are described in this section, although the screen
display is often all you need to understand how to set the options.
5-1
Setup
5-1-1 Standard Setup
Pri Master
Pri Slave
Sec Master
Sec Slave
Select these options to configure the drive named in the option. Select
Auto Detect IDE
to let AMIBIOS automatically configure the drive. A
screen with a list of drive parameters appears. Click on
OK
to configure
the drive.
T y p e
How to Configure
SCSI
Select
Type
. Select
Not Installed
on the drive
parameter screen. The SCSI drivers provided by
the SCSI manufacturer should allow you to configure
the SCSI drive.
IDE
Select
Type
. Select
Auto
to let AMIBIOS determine the
parameters. Click on OK when AMIBIOS displays the
drive parameters. Select
LBA Mode
. Select
On
if the
drive has a capacity greater than 540 MB. Select the
Block Mode
. Select
On
to allow block mode data
transfers. Select the
32-bit mode
. Select
On
to allow
32-bit data transfers. Select
PIO mode
. Select
On
to allow AMIBIOS to determine the PIO Mode. It
Summary of Contents for SUPER P6DBE
Page 12: ...Chapter 1 Introduction 1 3 Notes...
Page 38: ...Chapter 1 Introduction 1 29...
