Supero SUPER P6DBE, User Manual

Page: 85 / 104

Chapter 5: Running Setup
5-19
CPU Overheat Warning
The settings for this option are
Enabled
or
Disabled
. When set to
Enabled
this option allows the user to set an overheat warning tempera-
ture.
CPU Overheat Warning Temperature
Use this option to set the CPU overheat warning temperature. The
settings are 25 °C through 75 °C in 1 °C intervals . Note: The Optimal
and Fail-Safe default settings are 55 °C .
H/W Monitor In0 (CPU 1)
H/W Monitor In1 (CPU 2)
H/W Monitor In2 (+3.3V)
H/W Monitor In3 (+5V)
H/W Monitor In4 (+12V)
H/W Monitor In5 (-12V)
H/W Monitor In6 (-5V)
CPU1 Fan
CPU2 Fan
Thermal Control Fan
The above features are for PC Health Monitoring. The motherboards with
W83781D have seven on-board voltage monitors for the CPU core, CPU I/
O, +3.3V, +5V, -5V, +12V, and -12V, and three fan status monitors.
On-Board FDC
This option enables the FDC (Floppy Drive Controller) on the motherboard.
The settings are Auto (AMIBIOS automatically determines if the floppy
controller should be enabled), Disabled , or Enabled .
On-Board Serial Port 1
This option specifies the base I/O port address of serial port 1. The
settings are Auto (AMIBIOS automatically determines the correct base I/O
port address), Disabled , 3F8h/ COM1, 2F8h/COM2 , 3E8h/COM3 or 2E8h/
COM4 .
On-Board Serial Port 2
This option specifies the base I/O port address of serial port 2. The
settings are
Auto
(AMIBIOS automatically determines the correct base I/O
port address), Disabled , 3F8h/COM1 , 2F8h/COM2 , 3E8h/COM3 or 2E8h/
COM4 .