Supero SUPER P3TDL3, User Manual

Page: 64 / 96

S
UPER P3TDL3/P3TDLE User’s Manual
4-12
Wait for F1 if Error
This settings for this option are Enabled and Disabled. Disabled: This
prevents the AMIBIOS to wait on an error for user intervention. This setting
should be used if there is a known reason for a BIOS error to appear. An
example would be a system administrator must remote boot the system.
The computer system does not have a keyboard currently attached. If this
setting is set, the system will continue to bootup in to the operating system.
If ‘F1’ is enabled, the system will wait until the BIOS setup is entered.
Enabled: This option allows the system BIOS to wait for any error. If an
error is detected, pressing <F1> will enter Setup and the BIOS setting can
be adjusted to fix the problem. This normally happens when upgrading the
hardware and not setting the BIOS to recognize it.
Hit "Delete" Message Display
This option tells the system to display or not display the "Hit Delete to Enter
Setup" message. The settings are Enabled and Disabled.
Internal Cache
This option is for enabling or disabling the internal CPU L1 cache. Settings
include Disabled, Write-Thru and Write-Back. Disabled: This option pre-
vents the system from using the internal CPU L1 cache. This setting should
be used to slow the computer system down or to troubleshoot error mes-
sages. Write-Thru: This option allows the computer system to use the
internal CPU L1 cache as Write-Though cache. Write-Through cache is
slower than Write-Back cache. It performs write operations to the internal
L1 CPU cache and system memory simultaneously.Write-Back T h i s
option allows the computer system to use the internal CPU L1 cache as
Write-Back cache. Write-Back cache is faster than Write-Through cache.
Write-Back cache is a caching method in which modifications to data in the
cache aren’t copied to the cache source until absolutely necessary. Write-
back caching is available on all CPUs supported by this BIOS. With these
CPUs, write operations stored in the L1 cache aren’t copied to main memory
until absolutely necessary. This is the default setting.
External Cache
This option is for enabling or disabling the internal CPU L2 cache. Settings
include Disabled, Write-Thru and Write-Back. See description above.