Supero SUPER P3TDL3, User Manual

Page: 58 / 96

S
UPER P3TDL3/P3TDLE User’s Manual
4-6
Serial Port 2 Mode
This option allows the user to set the mode for serial port 2. The
settings for this item include Normal, Sharp-IR, SIR and Consumer.
Normal allows serial port 2 to act normally, while the others set the
port up to work with infrared devices.
Parallel Port Address
This option specifies the I/O address used by the parallel port. The settings
for this item include Disabled, 378, 278 and 3BC. Select your setting and
then press "Enter".
Parallel Port IRQ
This option allows the user to set the Parallel Port IRQ. The settings
for this item include 5 and 7.
Parallel Port Mode
This option specifies the parallel port mode. The settings for this item in-
clude Normal, Bi-directional, EPP and ECP.
ECP Mode DMA Channel
This option allows the user to set the setting for the ECP Mode of the DMA
Channel. The settings for this item include 0, 1 and 3.
IDE Configuration
Onboard PCI IDE Controller
This option allows the user to enable or disable the integrated IDE Control-
ler. The settings include Disabled, Primary, Second and Both. Select "Dis-
abled" to disable the Integrated IDE Controller. Select "Primary" to enable
the Primary IDE ontroller only. Select "Secondary" to enable the Secondary
IDE Controller only. Select "Both" to enable both Primary and Secondary
IDE Controllers.