Supero SUPER P3TDL3, User Manual

Page: 32 / 96

2-8
S
UPER P3TDL3/P3TDLE User’s Manual
PWR_ON
The PWR_ON connection is lo-
cated on pins 11 and 13 of JF1.
Momentarily contacting both pins
will power on/off the system. The
user can also configure this but-
ton to function as a suspend but-
ton. (See the Power Button Mode
setting in BIOS.) To turn off the
power when set to suspend mode,
hold down the power button for at
least 4 seconds. See Table 2-5
for pin definitions.
Reset
The Reset connection is located
on pins 15 and 17 of JF1. This
connector attaches to the hard-
ware reset switch on the com-
puter case. See Table 2-6 for pin
definitions.
Power LED
The Power LED connection is lo-
cated on pins 1, 3 and 5 of JF1.
See Table 2-3 for pin definitions.
IDE LED
The IDE LED connection is located
on pins 7 and 9 of JF1. Attach the
IDE hard drive LED cable to these
pins to display disk activity. See
Table 2-4 for pin definitions.
P in
N u m b e r
1
3
5
D e fin itio n
+ 5 V
K e y
G N D
T a b le 2 -3
P W R _ L E D P in
D e fin itio n s (J F 1 )
T a b le 2 -4
ID E _ L E D P in
D e fin itio n s
(J F 1 )
P in
N u m b e r
7
9
D e fin itio n
+ 5 V
H D A ctive
P in
N u m b e r
1 1
1 3
D e fin itio n
P W _ O N
G ro u n d
T a b le 2 -5
P W R _ O N C o n n e c to r
P in D e fin itio n s
(J F 1 )
P in
N u m b e r
1 5
1 7
D e fin itio n
R e se t
G ro u n d
T a b le 2 -6
R e s e t P in
D e fin itio n s
(J F 1 )