Supero SUPER P3TDL3, User Manual

Page: 60 / 96

S
UPER P3TDL3/P3TDLE User’s Manual
4-8
DMA Mode
This item allows the users to select the DMA mode. The settings are: Auto,
SWDMA0, SWDMA1, SWDMA2, MWDMA0, MWDMA1, MWDM2, UWDMA0,
UWDMA1, UWDMA2, UWDMA3 and UWDMA4. Select Auto to auto detect
the DMA Mode. Select SWDMA0 through SWDMA2 to set single word DMA0
through DMA2. Select MWDMA0 through MWDMA2 to set Multi-word DMA0
through DMA2. Select UDMA0 trhough UDMA4 to set Ultra DMA0 through
Ultra DMA4.
S.M.A.R.T.
S.M.A.R.T stands for Self-Monitoring Analysis and Reporting Technology, a
feature that can help predict impending drive failures. The settings are
Auto, Disabled and Enabled. Select "Enabled" or "Disabled" to enable or
disable the S.M.A.R.T. Select "Auto" to auto detect S.M.A.R.T.
32Bit Data Transfer
The settings are Auto, Disabled and Enabled. Select "Enabled" or "Disabled"
to enable or disable the 32-bit Data Transfer function. Select "Auto" to auto
detect the 32-bit Data Transfer function.
ARMD Emulation Type
This option is used to select the emulation used when configuring an LS120,
MO (Magneto-Optical), or Iomega Zip drive. The settings are Auto, Floppy
and HardDisk.
Primary IDE Slave
When the system enters "Setup", BIOS automatically detects the presence
of IDE devices. This option displays the auto detection status of IDE de-
vices. The settings for "Primary IDE Slave" are the same as those for the
"Primary IDE Master".
Secondary IDE Master
This displays the status of auto detection of IDE devices. The settings for
"Secondary IDE Master" are the same as those for the "Primary IDE Master".