Supero SUPER P3TDL3, User Manual

Page: 45 / 96

Chapter 2: Installation
2-21
2-10 Installing Software Drivers
After the OS (Operating System) has been installed and after installation of
any Service Pack or UpGrade to the OS, you must install the software
drivers included on the Supermicro CD. The necessary drivers are all in-
cluded on the Supermicro CD that came packaged with your motherboard.
After inserting that CD into your CDROM drive, the display shown in Figure
2-7 should appear. (If the display below does not appear, click on the "My
Computer" icon and then on the icon representing your CDROM drive. Fi-
nally, double click on the "Setup" icon.)
Figure 2-7. Driver/Tool Installation Display Screen
Click the icons showing a hand writing on paper to view the readme files
for each item. The bottom icon with a CD on it allows you to view the
entire contents of the CD.
Build Netword Card disk
Build SCA disk (QLogic GEM 354): for integration with the SuperServer
SC850 and SC860 chassis
Build SCSI disk (Ultra160)