Supero SC848 Series, User Manual

Page: 94 / 124

C-6
SC848 Chassis Manual
Fan Jumper Settings
This backplane can support up to four fans. To utilize each fan, you must configure
both jumpers as indicated below.
Fan Jumper Settings
Jumper Jumper Settings Note
JP61
Pins 1-2:With Fan (Default)
Pins 2-3:No Fan
FAN#1
JP97
Pins 1-2:With Fan (Default)
Pins 2-3:No Fan
FAN#1
JP62
Pins 1-2:With Fan (Default)
Pins 2-3:No Fan
FAN#2
JP98
Pins 1-2:With Fan (Default)
Pins 2-3:No Fan
FAN#2
JP63
Pins 1-2:With Fan (Default)
Pins 2-3:No Fan
FAN#3
JP99
Pins 1-2:With Fan (Default)
Pins 2-3:No Fan
FAN#3
JP64
Pins 1-2:With Fan (Default)
Pins 2-3:No Fan
FAN#4
JP100
Pins 1-2:With Fan (Default)
Pins 2-3:No Fan
FAN#4
I
2
C and SGPIO Modes and Jumper Settings
This backplane can utilize I
2
C or SGPIO. SGPIO is the default mode and can be
used without making changes to your jumper. The following information details
which jumper must be configured to use SGPIO mode or restore your backplane
to I
2
C mode.
SGPIO/I
2
C Setting
Jumper SGPIO Enabled (Default) I
2
C Enabled
JP84 Pins 1-2 Pins 2-3