Supero SC848 Series, User Manual, Page: 37 / 124

3-5
Chapter 3 System Interface
3-4 Drive Carrier LEDs
Your chassis uses SAS/SATA.
SAS/SATA Drives
Each SAS/SATA drive carrier has two LEDs.
•
Blue:
Solid on = Drive is present and available.
Blinking = Drive is actively being accessed.
Each Serial ATA drive carrier has a blue LED. When illuminated in a solid
on state, this blue LED (on the front of the SAS/SATA drive carrier) indicates
that the drive is present. A connection to the SAS/SATA backplane enables
this LED to blink on and off when that particular drive is being accessed.
•
Red:
Solid on = Drive failure
Blinking = Rebuilding RAID
The red LED to indicate an SAS/SATA drive failure. If one of the SAS/SATA
drives fail, you should be notified by your system management software.
SCSI Drives
This chassis does not support SCSI drives at this time.