Supero FatTwin F627R2-F73, User Manual

Page: 72 / 144

5-18
FatTwin F627R2-F73 USER'S MANUAL
TPM Header/Port 80
A Trusted Platform Module/Port 80
header is located at JTPM1 to provide
TPM support and Port 80 connection.
Use this header to enhance system
performance and data security. See the
table on the right for pin defi nitions.
TPM/Port 80 Header (JTPM1)
Pin Defi nitions
Pin# Defi nition Pin# Defi nition
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK4 14 SMB_DAT4
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)
SATA DOM Power Connector
A power connector for SATA DOM
(Disk_On_Module) devices is located
at JSD1. Connect an appropriate cable
here to provide power support for your
SATA DOM devices.
DOM PWR (JSD1)
Pin Defi nitions
Pin# Defi nition
1 +5V
2 Ground
3 Ground
T-SGPIO1 Header
Two SGPIO (Serial-Link General Purpose
Input/Output) headers are located on the
motherboard. In addition, a 6-SGPIO1
is located on X9DRFF-7 motherboard.
These headers support onboard Serial_
Link interface connections.
Note: T-SGPIO 1/2 support onboard
SATA connections. 6-SGPIO1 supports
SAS interface for X9DRFF-7.
T-SGPIO 1/2
Pin Defi nitions
Pin# Defi nition Pin Defi nition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 NC
NC indicates no connection.