Supero FatTwin F627R2-F73, User Manual

Page: 122 / 144

7-18
FatTwin F627R2-F73 FatTwin
Load Onboard SAS OPROM
Select Enabled to enable the onboard SAS Option ROM. This is to boot the
computer using a SAS device. The options are Disabled and Enabled .
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard , and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled .
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled
and Disabled .

Super IO Confi guration
Super IO Chip: This item displays the Super IO chip used in the motherboard.

COM1 Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are
Enabled and Disabled.
Device Settings
This item displays the settings of Serial Port 1.
Change Settings
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1. Select Disabled to prevent the serial port from accessing any
system resources. When this option is set to Disabled, the serial port becomes
unavailable. The options are Auto , IO=3F8h; IRQ=4, IO=3F8h; IRQ=3, IO=2F8h;
IRQ=3, IO=3E8h; IRQ=5, IO=2E8h; IRQ=7, IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11,