Supero FatTwin F627R2-F73, User Manual

Page: 11 / 144

Chapter 1
Introduction
1-1 Overview
The FatTwin F627R2-F73 is a high-end server comprised of two main subsystems:
the F424BD-R1K28B 4U server chassis and the X9DRFF-7 dual processor
serverboard in four hot-swap nodes. Please refer to our web site for information
on operating systems that have been certifi ed for use with the system (www.
supermicro.com).
In addition to the serverboard and chassis, various hardware components have
been included with the FatTwin F627R2-F73 server, as listed below:
•
Eight (8) 2U passive CPU heatsinks for CPU (SNK-P0048P)
•
Power cables:
Four (4) 15-cm 2x2 to 2x2 18AWG power cables (CBL-0486L)
Four (4) 30-cm 2x2 to 2x2 18AWG power cables (CBL-PWEX-0486L-01)
•
SAS/SATA Backplane
Four (4) backplanes for thirty-two (32) 2.5" HDD (BPN-SAS-F424-B8)
Thirty-Two (32) hot-swap 2.5" HDD trays (MCP-220-00098-0B)
Four (4) 23-cm w/25.5-cm SB 30AWG Ipass to 4 SATA cables
(CBL-0118L-03)
Four (4) 27-cm 8-pin to 8-pin ribbon SGPIO cable with tube (CBL-0157L-02)
Sixteen (16) 21-cm 30AWG SATA cables (CBL-0473L)
•
Four (4) Riser cards (RSC-R1UFF-E16R-O-P)
•
One (1) F418/F424 Rail set (MCP-290-41803-0N)
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your server.
•
Supermicro product manuals: http://www.supermicro.com/support/manuals/
•
Product drivers and utilities: ftp://ftp.supermicro.com
•
Product safety information:
http://super-dev/about/policies/safety_information.cfm
•
If you have any questions, please contact our support team at:
support@supermicor.com
Chapter 1: Introduction
1-1