Supero FatTwin F627R2-F73, User Manual

Page: 12 / 144

1-2
FatTwin F627R2-F73 USER'S MANUAL
1-2 Serverboard Features
A t t h e h e a r t o f t h e F a t Tw i n F 6 2 7 R 2 - F 7 3 s e r v e r s y s t e m l i e s t h e
X 9 D R F F - 7 , a d u a l p r o c e s s o r s e r v e r b o a r d b a s e d o n t h e I n t e l ®
C602J chipset and designed to provide maximum performance. Four of these
serverboards can be mounted in the F424BD-R1K28B chassis.
The sections below cover the main features of the X9DRFF-7 serverboard (see
Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRFF-7 supports single or dual Intel® Xeon® E5-2600 series processors
(Socket R LGA 2011). Each processor supports four full-width Intel QuickPath
Interconnect (QPI) links, with support of up to 25.6 GT/s per QPI link and with
Data Transfer Rate of up to 8.0 GT/s per direction. Please refer to the serverboard
description pages on our web site for a complete listing of supported processors
( www.supermicro.com ).
Memory
Each X9DRFF-7 serverboard node has eight (8) DIMM slots supporting up to
256 GB of DDR3-1600/1333/1066/800 MHz speed RDIMM/LDIMM registered
ECC or 64 GB of DDR3-1600/1333/1066/800 MHz speed UDIMM SDRAM in up
to 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.35V or 1.5V voltages. See
Chapter 5 for details.
Note: For the latest CPU/memory updates, please refer to our website at
http://www.supermicro.com/products/motherboard .
SAS
An LSI ® SAS2308 SAS2 controller is integrated into X9DRFF-7 serverboard
of the F627R2-F73 server to provide a four port 6 Gb/s SAS3 (Serial Attached
SCSI) subsystem and four 6 Gb/s SAS2 connectors, which are RAID 0, 1 and 10
supported. The SAS drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the
hotswap capability and RAID function of the SAS drives.