212
SuperStorage SSG-1129P-ACR10N4L User's Manual
Appendix E
System Specifications
Processor Support
Dual Intel® Xeon® Scalable SP and 2nd Gen Intel® Xeon® Scalable SP processors
Note:
Please refer to the motherboard webpage for updates to supported processors.
Chipset
Intel C621 chipset
BIOS
256Mb Aten BIOS
Memory Support
16 DIMM slots for up to 4TB of ECC DDR4-2933/2666/2400/2133 MHz speed Load Reduced DIMM (3DS LRDIMM), Load
Reduced DIMM (LRDIMM), 3DS Registered DIMM (3DS RDIMM), Registered DIMM (RDIMM), Non-Volatile DIMM (NV-DIMM)
memory.
Notes:
Support for 2933 MHz memory is dependent on the CPU SKU 2. Up to 2TB DCPMM memory is supported (2nd Gen
Intel Xeon Scalable-SP 82xx/62xx/52xx/42xx series processors only).
See the memory section in Chapter 3 for details and our website for updates to supported memory.
SATA Controller
On-chip (Intel C621) controller
Drive Bays
10 hot-swap 2.5” drive bays:
- Four hybrid NVMe/SAS/SATA + six SAS/SATA drive bays (12Gb) with AOM-S3216-DPD-L
Two onboard M.2 NVMe/SATA slots (22x80mm)
PCI Expansion Slots
One PCIe 3.0 x8 slot supported by CPU1
One PCIe 3.0 x16 slot supported by CPU1
One PCIe 3.0 x16 AIOM slot supported by CPU1
One PCIe 3.0 x16 slot supported by CPU2
Motherboard
X11DPD-M25; E-ATX form factor, 12.3" x 13.4" (31.24cm x 34.04cm)
Chassis
SCLB16TS-R804AMP; 1U Rackmount, W x H x D: 17.2" (437mm) x 1.7" (43mm) x 23.5" (597mm)
System Cooling
Six 4-cm counter-rotating PWM fans
Power Supply
Model: PWS-804P-1R (two power modules for redundancy)
AC Input Voltages: 100-240 VAC
Rated Input Current: 7.5-3.5A
Rated Input Frequency: 50-60 Hz
Rated Output Power: 800W
Rated Output Voltages: 50A (+12V)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
