Chapter 6: UEFI BIOS
131
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event log
is full. The options are
Do Nothing
and Erase Immediately.
Note
: After making changes on a setting, be sure to reboot the system for the changes
to take effect.
BMC Network Configuration
BMC network configuration
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes upon next system boot.
The options are
No
and Yes.
Configure IPv4 support
IPMI LAN Selection
This feature displays the IPMI LAN setting. The default setting is
Failover
.
IPMI Network Link Status:
This feature displays the IPMI Network Link status. The default setting is
Dedicated LAN
.
Configuration Address Source (Available when Update IPMI LAN Configuration is
set to Yes)
Use this feature to select the IP address source for this computer. If Static is selected, you
will need to know the IP address of this computer and enter it to the system manually in the
field. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server attached to the network and request the next available IP address for this
computer. The options are Static and
DHCP
.
Station IP Address
This feature displays the Station IP address for this computer. This should be in decimal and
in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This feature displays the sub-network that this computer belongs to. The value of each three-
digit number separated by dots should not exceed 255.
Station MAC Address
This feature displays the Station MAC address for this computer. Mac addresses are six
two-digit hexadecimal numbers.
