86
SuperStorage SSG-1129P-ACR10N4L User's Manual
Hardware PM (Power Management) State Control
(Available when
Power Technology is set to Custom)
Hardware P-States
If this feature is set to Disable, hardware will choose a P-state setting for the system
based on an OS request. If this feature is set to Native Mode, hardware will choose
a P-state setting based on OS guidance. If this feature is set to Native Mode with No
Legacy Support, hardware will choose a P-state setting independently without OS guid-
ance. The options are
Disable
, Native Mode, Out of Band Mode, and Native Mode with
No Legacy Support.
CPU C State Control
(Available when Power Technology is set to
Custom)
Autonomous Core C-State
Select Enable to support Autonomous Core C-State control which will allow the proces-
sor core to control its C-State setting automatically and independently. The options are
Disable
and Enable.
CPU C6 report (Available when Autonomous Core C-State is set to Disable)
Select Enable to allow the BIOS to report the CPU C6 state (ACPI C3) to the operating
system. During the CPU C6 state, power to all caches is turned off. The options are
Disable, Enable, and
Auto
.
Enhanced Halt State (C1E) (Available when Autonomous Core C-State is set to
Disable)
Select Enable to enable "Enhanced Halt State" support, which will significantly reduce the
CPU's power consumption by minimizing CPU's clock cycles and reduce voltage during
a "Halt State." The options are Disable and
Enable
.
Package C State Control
(Available when Power Technology is set to
Custom)
Package C State
This feature is used to optimize and reduce CPU package power consumption in idle
mode. Please note that the changes you've made in this setting will affect all CPU cores
or the circuits of the entire system. The options are C0/C1 state, C2 state, C6 (non Re-
tention) state, C6 (Retention) state, No Limit, and
Auto
.
CPU T State Control
(Available when Power Technology is set to
Custom)
Software Controlled T-States
If this feature is set to Enable, CPU throttling settings will be supported by the software
of the system. The options are Disable and
Enable
