manualshive.com logo in svg

Supermicro SuperStorage SSG-1129P-ACR10N4L, User Manual, Page: 171 / 213

Share
Download
Supermicro SuperStorage SSG-1129P-ACR10N4L User Manual Download Page 171

Appendix C: Configuring VROC RAID Settings

171

To Set the RAID Level for the RAID Volume

From the 

Create RAID Volume 

submenu, select 

RAID Level

 and press <Enter>. The 

following screen will display.

Note 1:

 The RAID level(s) displayed is(are) based on the number of NVMe devices 

connected to the system. 

Note 2:

 For RAID0/RAID1/RAID5/RAID10, the minimum number of NVMe devices 

required is two/two/three/four respectively. 

Note 3:

 Use Intel® VROC Standard hardware key to support RAID 0/1/10. Use Intel® 

VROC Premium hardware key (or Intel SSD Only hardware key) to support RAID 
0/1/5/10.

Use the arrow keys to select the desired RAID level for the RAID volume that you've created. 
The options are 

RAID0(Stripe)

, RAID1(Mirror), RAID5(Parity), and RAID10(RAID0+1).

Summary of Contents for SuperStorage SSG-1129P-ACR10N4L






















































































































































































































Reviews:

No comments