51
Chapter 3: Maintenance and Component Installation
Removing a Tooless" 2.5" Hard Drive
1.
Place the hard drive carrier on a flat surface. Release the two plastic clips opposite from
where the stubs are located. This will release the hard drive from the tray.
2. Pull the hard drive upwards to retrieve the hard drive.
2
1
Figure 3-11. Removing a 2.5" Hard Drive
Checking the Temperature of an NVMe Drive
There are two ways to check using IPMI.
Checking a Drive
•
IPMI > Server Health > NVMe SSD –
Shows the temperatures of all NVMe drives, as in
Figure 3-12.
•
IPMI > Server Health > Sensor Reading > NVME_SSD –
Shows the single highest tem-
perature among all the NVMe drives.
