Supermicro SuperServer 8049U-E1CR4T User Manual Download Page 88

Page: 88 / 160

SuperServer 8049U-E1CR4T User's Manual

Enable ADR

Select Enable for ADR (Automatic Diagnostic Repository) support to enhance memory
performance. The options are Enable and

Disable



Memory Topology

This item displays the information of onboard memory modules as detected by the
BIOS.

•

P1 DIMMA1/DIMMA2/DIMMB1/DIMMB2/DIMMC1/DIMMC2/DIMMD1/DIMMD2/
DIMME1/DIMME2/DIMMF1/DIMMF2

•

P2 DIMMA1/DIMMA2/DIMMB1/DIMMB2/DIMMC1/DIMMC2/DIMMD1/DIMMD2/
DIMME1/DIMME2/DIMMF1/DIMMF2

•

P3 DIMMA1/DIMMA2/DIMMB1/DIMMB2/DIMMC1/DIMMC2/DIMMD1/DIMMD2/
DIMME1/DIMME2/DIMMF1/DIMMF2

•

P4 DIMMA1/DIMMA2/DIMMB1/DIMMB2/DIMMC1/DIMMC2/DIMMD1/DIMMD2/
DIMME1/DIMME2/DIMMF1/DIMMF2



Memory RAS (Reliability_Availability_Serviceability) Configuration

Use this submenu to configure the following Memory RAS settings.

Static Virtual Lockstep Mode

Select Enable to support Static Virtual Lockstep mode to enhance memory performance.
The options are Enable and

Disable

Mirror Mode

Use this feature to configure the mirror mode settings for all 1LM/2LM memory modules

installed in the system which will create a duplicate copy of data stored in the memory to
increase memory security, but it will reduce the memory capacity into half. The options are

Disable

, Mirror Mode 1LM, and Mirror Mode 2LM.

Memory Rank Sparing

Select Enable to support memory-rank sparing to optimize memory performance. The
options are Enable and

Disable

Note:

This item will not be available when memory mirror mode is enabled.

Correctable Error Threshold

Use this item to enter the threshold value for correctable memory errors. The default setting
is 10.

Summary of Contents for SuperServer 8049U-E1CR4T

































































































































































Search results

Summary of Contents for SuperServer 8049U-E1CR4T

Reviews:

Related manuals for SuperServer 8049U-E1CR4T

Brands by name

Popular brands

Supermicro SuperServer 8049U-E1CR4T, User Manual

Search results

Summary of Contents for SuperServer 8049U-E1CR4T

Reviews:

Related manuals for SuperServer 8049U-E1CR4T

Brands by name

Popular brands