Supermicro SuperServer 5035L-I, User Manual

Page: 69 / 82

Chapter 7: BIOS
7-15
CPU Temperature,
System Temperature,
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When
the CPU on-die temperature increases, the fan speed will also increase, and vice
versa. Select Workstation if your system is used as a Workstation. Select Server
if your system is used as a Server. Select “Disabled, (Full Speed @12V)” to dis-
able the fan speed control function and allow the onboard fans to constantly run at
the full speed (12V). The Options are: 1. Disabled , 2. 4-pin (Server), and 3. 4-pin
(Workstation).
This screen also displays Voltage Monitoring information:
Vcore, AVCC, +3.3Vcc, 12V, VDIMM, 5V, Chipset 1.5V, 3.3Vsb, and Vbatt.
Note: In the Windows OS environment, the Super Doctor III (SD III) set-
tings take precedence over the BIOS settings. When fi rst installed, SD
III adopts the temperature threshold settings previously set in the BIOS.
Any subsequent changes to these thresholds must be made within SD III,
since the SD III settings override the BIOS settings. For the Windows OS
to adopt the BIOS temperature threshold settings, please change the SD
III settings to be the same as those set in the BIOS.
X
Remote Access Confi guration
Remote Access
This feature allows the user to enable the function of Remote Access. The op-
tions are Disabled and Enabled.
If the item Remote Access is set to Enabled, the following items will display:
Serial Port Number
This feature allows the user decide which serial port to be used for Console
Redirection. The options are COM 1 , and COM 2.
Serial Port Mode
This feature allows the user to set the serial port mode for Console Redirection.
The options are 115200 8, n 1 ; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and
9600 8, n, 1.