1-2
S
UPER
S
ERVER 5035L-I User's Manual
1-2 Motherboard
Features
At the heart of the SuperServer 5035L-I lies the X7SLM-L, a single processor moth-
erboard based on the Intel 945GC + ICH7R chipset. Below are the main features
of the X7SLM-L. (See Figure 1-1 for a block diagram of the chipset).
Processors
The X7SLM-L supports a single Intel® Core™ 2 processor E4000 series or a
Pentium® dual core or Celeron® brand processor up to 800 MHz FSB. Please
refer to the motherboard description pages on our web site for a complete listing
of supported processors (www.supermicro.com).
Memory
The X7SLM-L has two DIMM slots that can support up to 2 GB of unbuffered DDR2-
667/533/400 SDRAM. Single channel and dual-channel interleaved confi gurations
are supported. Memory modules of the same size and speed should be used. See
Chapter 5 for details.
Serial ATA
A SATA controller is integrated into the South Bridge (ICH7R) section of the chipset
to provide a four-port Serial ATA subsystem, which is RAID 0, 1, 10 and 5 capable.
The Serial ATA drives are not hot-swappable units. See Appendix B for instructions
on RAID setup.
PCI Expansion Slots
The X7SLM-L has one PCI-E x16, one PCI-E x4 and two 32-bit PCI slots.
Onboard Controllers/Ports
An onboard ATA/100 controller is provided to support up to two IDE hard drives
or ATAPI devices. The color-coded I/O ports include two COM ports, two USB 2.0
ports, PS/2 mouse and keyboard ports and two Gb Ethernet ports.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
Summary of Contents for SuperServer 5035L-I
