6-10
S
UPER
S
ERVER 5035L-I User's Manual
6-7 Power
Supply
The SC731 chassis includes a 300-watt power supply. The power supply has the
capability to automatically sense and operate with an input voltage of 100 or 240V
AC.
If it becomes necessary to replace the power supply, follow the instructions be-
low.
Replacing the Power Supply
Disconnect the chassis from any power source. Also disconnect all power
1.
cables that are connected to the motherboard.
Remove the screws securing the power supply to the chassis. These are
2.
located on the rear of the chassis. Set these screws aside for later use.
Gently lift the power supply out of the chassis.
3.
Replace the failed power supply with an identical power supply model.
4.
Secure the new power supply using the screws previously set aside.
5.
Reconnect the power cables to the motherboard.
6.
Plug the AC power cord back into the module and power up the server.
7.
Finish by replacing the chassis left cover and then restoring power to the
8.
system.
Summary of Contents for SuperServer 5035L-I
