Supermicro SuperServer 5035L-I, User Manual

Page: 43 / 82

Chapter 5: Advanced Motherboard Setup
5-19
5-12 SATA and IDE Ports
SATA Port
Pin Defi nitions
(I-SATA0 ~ I-SATA5 )
Pin # Defi nition
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
SATA Ports
Six Serial ATA (SATA) ports (I-SATA
0~5) are located on the motherboard
to provide serial link connections. Se-
rial Link connections provide faster
data transmission than those of the
traditional Parallel ATA. These SATA
ports are supported by the Intel
ICH10R Chip (South Bridge). See the
table on the right for pin defi nitions.
IDE Connector
Pin Defi nitions (IDE)
Pin# Defi nition Pin # Defi nition
1 Reset IDE 2 Ground
3 Host Data 7 4 Host Data 8
5 Host Data 6 6 Host Data 9
7 Host Data 5 8 Host Data 10
9 Host Data 4 10 Host Data 11
11 Host Data 3 12 Host Data 12
13 Host Data 2 14 Host Data 13
15 Host Data 1 16 Host Data 14
17 Host Data 0 18 Host Data 15
19 Ground 20 Key
21 DRQ3 22 Ground
23 I/O Write 24 Ground
25 I/O Read 26 Ground
27 SIORDY 28 (PD)
29 SDDACK# 30 Ground
31 IRQ15 32 (NC)
33 Addr1 34 SHDD66DET
35 Addr0 36 Addr2
37 SDCS1# 38 SDCS3#
39 SHDDLED# 40 Ground
41 +5V 42 +5V
43 Ground 44 (NC)
IDE Connector
An IDE connector is located close to
SATA Ports 0~3 on the motherboard.
This 44-pin connector provides sup-
port for 2.5" hard drive disks. See the
table on the right for pin defi nitions.