Supermicro SuperServer 5035L-I, User Manual

Page: 35 / 82

Chapter 5: Advanced Motherboard Setup
5-11
X7SLM-L Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear (See Section 5-10)
JPL1/JPL2 LAN 1/2 Enable/Disable Pins 1-2 (Enabled)
JWD Watch Dog Timer Enable/Disable Pins 1-2 (Reset)
Connector Description
COM1/COM2 COM1/2 Serial Port Connectors
Fan 1~5 Fan headers (Fan 1 = CPU fan)
I-SATA 0~5 (Intel South Bridge) SATA Ports
IDE IDE Hard Drive Connector
JD1 Power LED/Speaker Header
JF1 Control Panel Header
JL1 Chassis Intrusion Header
JOH1 Overheat LED Header
JP3 Power Extension Connector (for add-on cards)
JPW1 24-pin ATX Main Power Connector
JPW2 8-pin Auxilliary Power Connector
LAN1/LAN2 Gigabit Ethernet (RJ45) ports
USB0/1 Rear I/O Panel USB Ports
USB2/3, USB5/6 Onboard USB Headers
USB4, USB7 Front Panel Accessible USB Headers
LED Description
LE1 Onboard Power LED Indicator
Notes
Jumpers not noted are for test purposes only.
The JP3 connector provides power from the motherboard to an IDE or SATA drive
and is not to be connectoed to the power supply.