Supermicro SuperServer 5035L-I, User Manual

Page: 68 / 82

7-14
S
UPER
S
ERVER 5035L-I User's Manual
Load Onboard LAN 1 Option ROM/ Load Onboard LAN 2 Option ROM
Select Enabled to load the onboard LAN Option ROM for the LAN port as specifi ed.
The options are Enabled and Disabled .
X
Super IO Confi guration
Onboard Floppy Controller
Select Enabled to enable the onboard Floppy Controller. The options are Enabled
and Disabled.
Serial Port1 Address/ Serial Port2 Address
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4 , 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2
are Disabled, 2F8/IRQ3 , 3E8/IRQ4, and 2E8/IRQ3.
Serial Port 2 Mode
Use this feature to confi gure Serial Port 2 mode. The options are Normal, IrDA
and ASK IR.
Keyboard Wake Up
Select Specifi c Key to enable the keyboard wake-up feature using a pre-set
keyboard key, and Any Key to use any keyboard key. The options are Disabled ,
Specifi c Key, and Any Key.
Specifi c Key for Power On
This option becomes active if Specifi c Key (above) is enabled. When se-
lected, this will allow the entry of a keystroke combination to wake-up the
system. Enter the keystroke(s) when "Enter New Password" appears, then
re-enter to confi rm.
Mouse Wake Up
Use this option to wake-up the system using the installed mouse. The options are
Disabled , and Enabled.
X
Hardware Health
Confi guration
This feature allows the user to monitor Hardware Health of the system and review
the status of each item when displayed.