Supermicro Supero 6037R-E1R16N, User Manual

Page: 44 / 75

Chapter 5: Advanced Serverboard Setup
5-31 5-30
S
UPER
S
TORAGE
S
YSTEM 6037R-E1R16N User's Manual
5-11 SATA Ports
SATA Port
Pin Definitions
Pin# Definition Pin Definition
1 Ground 2 TXP
3 TXN 4 Ground
5 RXN 6 RXP
7 Ground
Note: For more information on SATA HostRAID configuration, please refer to the
Intel SATA HostRAID User's Guide posted on our Website @ http://www.supermi-
cro.com..
Serial ATA Ports
There are six Serial ATA Ports (I-
SATA0~I-SATA 5) located on the
serverboard, including four SATA2.0
ports and two SATA3.0 ports. These
ports provide serial-link signal con-
nections, which are faster than Paral-
lel ATA. See the table on the right for
pin definitions.
5-12 Installing Software
The Supermicro ftp site contains drivers and utilities for your system at ftp://ftp.
supermicro.com . Some of these must be installed, such as the chipset driver.
After accessing the ftp site, go into the CDR_Images directory and locate the ISO
file for your serverboard. Download this file to create a CD/DVD of the drivers and
utilities it contains. (You may also use a utility to extract the ISO file if preferred.)
Another option is to go to the Supermicro Website at http://www.supermicro.com/
products/ . Find the product page for your serverboard here, where you may down-
load individual drivers and utilities.
After creating a CD/DVD with the ISO files, insert the disk into the CD/DVD drive
on your system and the display shown in Figure 5-5 should appear.
Note:
Click the icons showing a hand writing on paper to view the readme files
for each item. Click the computer icons to the right of these items to install each
item (from top to the bottom) one at a time.
After installing each item, you must
re-boot the system before moving on to the next item on the list. The bottom
icon with a CD on it allows you to view the entire contents.
Figure 5-5. Driver/Tool Installation Display Screen