Supermicro Supero 6037R-E1R16N, User Manual

Page: 50 / 75

Chapter 6: Advanced Chassis Setup
6-7 6-6
S
UPER
S
TORAGE
S
YSTEM 6037R-E1R16N User's Manual
Figure 6-4. Removing a Drive Carrier
Warning: All drive carriers must remain in the drive bays to maintain proper cooling
airflow.
Release Button
Removing the Air Shroud
Under most circumstances you will not need to remove the air shroud to perform
any service on the system. However, if you wish to temporarily remove it (the air
shroud sould always be in place when the system is operating), please follow this
procedure.
The air shroud is secured into place with the rear exhaust fans. Remove both of
these fans by depressing their tabs and lifting them out of the chassis. You can then
lift the air shroud out (see Figure 6-5). To reinstall, simply position the air shroud
in its proper place and push both fans back in until you hear them click into place.
Hard Drive Backplane
The hard drives plug into a backplane that provides power, drive ID and bus termi-
nation. A RAID controller can be used with the backplane to provide data security.
The operating system you use must have RAID support to enable the hot-swap
capability of the SATA drives. The backplane is already preconfigured, so there are
no jumpers or switches present on it.
Handle
Figure 6-5. Removing the Air Shroud